Shop
Cleanwater No Scale Undersink Filter kit
€175.00
✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction
✔ Phosphate – for scale inhibition
✔ De-alk resin – for temporary hardness and heavy metal reduction
The Cleanwater No Scale 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
The full kit includes:
The kit includes everything you need to get the system up and running and is easy to install.
1 off 10″ Housing with 1/2″ BSP Brass Female Ports
1 off 2.5 x 10 GAC & Phosphate Filter
Stylish swan neck stainless steel tap
1 off 1/2″ (male-female) Feed In Valve with 1/4″ Adaptor
2 off 1/2″ Male to 1/4″ Push Fit
2 metres of 1/4″ Tubing
If you would like a single kitchen tap which connects your hot, cold and filtered water in one stylish solution, you also have the option to buy this great water filter system with any of our Cleanwater 3 Way Triflow Taps
Additional details:
| Filter Parameter | Limescale, Heavy Metals |
|---|---|
| In Depth | Filter 1: NSF Certified 5 Micron Carbon Block
Micron Rating: 5 micron Filter 2: GAC Phosphate & De-Alk Dimensions: 9 3/4″ x 2 1/2″ The Cleanwater NoScale 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use. Please check the filter for any damage or cracks before installation. Ensure the water is flushed through for 5 minutes to clear any loose particles and carbon fines. Do not use with water which is microbiologically unsafe or of unknown quality. Use in cold water applications only. Contains NSF Certified Coconut Carbon and Hardness Resin. Capacity: 1080 Litres @ 150ppm Total Hardness – 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date |
