Shop

Cleanwater No Scale Undersink Filter Fully Installed

249.00

✔ Granular Activated Carbon (GAC) – for chlorine, taste and odour reduction

✔ Phosphate – for scale inhibition

✔ De-alk resin – for temporary hardness and heavy metal reduction

The Cleanwater No Scale 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.

The full kit includes:

The kit includes everything you need to get the system up and running and is easy to install.

1 off 10″ Housing with 1/2″ BSP Brass Female Ports

1 off 2.5 x 10 GAC & Phosphate Filter

Stylish swan neck stainless steel tap

1 off 1/2″ (male-female) Feed In Valve with 1/4″ Adaptor

2 off 1/2″ Male to 1/4″ Push Fit

2 metres of 1/4″ Tubing

If you would like a single kitchen tap which connects your hot, cold and filtered water in one stylish solution, you also have the option to buy this great water filter system with any of our Cleanwater 3 Way Triflow Taps

Additional details:

Filter Parameter Limescale, Heavy Metals
In Depth Filter 1: NSF Certified 5 Micron Carbon Block

Micron Rating: 5 micron
Dimensions: 9 3/4″ x 2 1/2″
Temperature Range: 50 – 125 F
Max. Operating Pressure: 125 PSIG
Filter Life: About 16000 litres or 6 months
Filter Media: Extruded coconut shell carbon block
Max. Flow Rate: Approx. 4 LPM

Filter 2: GAC Phosphate & De-Alk

Dimensions: 9 3/4″ x 2 1/2″
Temperature Range: 50 – 125 F
Max. Operating Pressure: 125 PSIG
Filter Life: 3-6 months depending on hardness
Max. Flow Rate: Approx. 4 LPM

The Cleanwater NoScale 2.5 x 10 GAC/Phosphate & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 – 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.

Please check the filter for any damage or cracks before installation. Ensure the water is flushed through for 5 minutes to clear any loose particles and carbon fines. Do not use with water which is microbiologically unsafe or of unknown quality. Use in cold water applications only. Contains NSF Certified Coconut Carbon and Hardness Resin.

Capacity: 1080 Litres @ 150ppm Total Hardness – 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date